PUAVEH001 - Drive vehicles under operational conditions

Learn how to drive a vehicle safely in operational conditions

Duration

1 Day

Cost

$470

Location

Delivery Mode

Face-to-Face

Accredited

PUAVEH001 - Drive vehicles under operational conditions overview

The PUAVEH001 Drive vehicles under operational conditions course provides learners with the essential skills and knowledge to operate vehicles safely and effectively across a variety of operational environments. The program supports participants in developing the confidence and competence required to perform vehicle operations in both routine and high‑pressure scenarios. Through a blend of structured instruction, practical application, and scenario‑based learning, participants gain the ability to prepare vehicles for deployment, manage hazardous situations, and apply safe driving practices aligned with organisational procedures and regulatory requirements. This unit is ideal for personnel in emergency response, public safety, mining, construction, security, and other sectors where operational driving is a core responsibility.

What you will learn:

Vehicle Preparation for Operational Response – Conduct systematic pre‑operational checks, verify equipment and accessories, complete cabin drills, and ensure the vehicle is ready for deployment in accordance with organisational standards.
Safe Vehicle Operation in Varied Conditions – Operate vehicles confidently on‑road and off‑road, applying controlled manoeuvres, low‑risk driving techniques, and compliance with traffic regulations and workplace procedures.
Monitoring Traffic, Road, and Terrain – Assess and respond to changing environmental conditions, select efficient travel routes, and maintain situational awareness to ensure safe movement of vehicles, passengers, and equipment.
Hazard Identification and Risk Management – Recognise operational hazards, apply risk‑mitigation strategies, and make informed decisions to prevent injury or damage during vehicle operations.
Operational Decision‑Making Under Pressure – Develop the ability to adapt driving strategies in dynamic or high‑risk scenarios, ensuring safe and effective responses to operational contingencies.
WHS/OHS Responsibilities and Compliance – Understand legislative obligations, organisational policies, and safe work practices that underpin professional accountability in operational driving roles.

Learners emerge equipped to apply organisational driving procedures, comply with relevant regulations, and perform effectively in environments where safe vehicle operation is critical. This unit supports capability development across emergency services, resource industries, public safety, and other sectors requiring skilled operational drivers.

Entry Requirements

Age – Participants must be a minimum of 18 years old
Unique Student Identifier (USI) – All participants must provide a valid USI prior to course commencement, in accordance with national training requirements.
Language, Literacy and Numeracy (LLN) – Language, Literacy, Numeracy and Digital needs (LLND) must be assessed before commencing the course you are enrolled for. You need to be confident to interpret safety instructions, complete documentation and communicate directly and using radios to complete the theory and practical components of the course
Identification – Official Photo Identification will need to be presented on the day of your course
Physical Capacity and Physical Fitness – Students must have sufficient physical fitness and functional capacity to undertake the demands of the practical components of the demonstrations and assessments. These include driving a 4WD vehicle under different conditions, operating a jack, changing a tyre, use recovery equipment, conduct preoperational vehicle inspections, loading practices, vehicle maintenance and minor repairs.
Driver Licence – A current & not restricted Australian Open Licence is required to be provided for this course. Your licence must be for at least a Car – C class vehicle. Provisional licence (P plate) holders can enrol – please enquire directly with us. Learners Permit are not valid for this course.

By enrolling, you acknowledge that being under the influence of drugs or alcohol is a breach of safety protocols. In these instances, no refund will be issued, and full course fees will apply for any future re-booking.

Is this course for me?

The PUAVEH001 Drive vehicles under operational conditions course is suitable for individuals who are required drive vehicles in different situations and road conditions.

This course is ideal for:

Supervisors and leaders responsible for operational vehicle deployment
Mining and resources emergency response teams
High‑risk industrial and infrastructure workers
State Emergency Service coordinators, staff and volunteers
Security and Safety Officers
Medical and health responders in field environments
Civil construction and infrastructure personnel
Other organisations requiring operational vehicle use

Suitable for:

Individuals working in operation roles. The unit is applicable for public safety personnel who are required to operate vehicles both on and off road during public safety operations
Organisations seeking to ensure staff are trained and compliant with safe driving of a vehicle under operational conditions in conjunction with WHS and emergency response requirements

Course Benefits

Completing the PUAVEH001 Drive vehicles under operational conditions unit provides participants with critical safety and professional competencies valued across multiple industries.

Key benefits include:

Improved Safety Awareness – Learn to apply safety standards and risk management skills to driving under operational conditions
National Recognition – Gain a Statement of Attainment recognised under the Australian Qualifications Framework (AQF).
Regulatory Compliance – Meet WHS, emergency response, and industry-specific safety requirements.
Practical Experience – Train with industry-standard equipment in realistic scenarios to build confidence and proficiency and capability
Career Progression – Enhance employability in roles that require enhanced operational driving capabilities
Emergency Readiness – Be prepared to respond effectively to incidents that require safe decision making under pressure.

Career Opportunities

The PUAVEH001 Drive vehicles under operational conditions unit develops the essential skills and knowledge required to operate vehicles safely and effectively in dynamic, high‑pressure, or specialised work environments. Learners gain capability in preparing vehicles for deployment, conducting safety checks, applying low‑risk driving techniques, and navigating varied terrain and conditions in line with organisational procedures. This unit supports individuals seeking to enhance their employability in roles where operational driving is a core requirement.

Roles that this unit may be relevant to:

Emergency response team member
Firefighter recruit
Rescue operator
Public safety officer
Security patrol officer
Field operations worker
Utility or infrastructure response driver
High‑risk industrial operations staff
Field leadership roles requiring operational driving competency

These roles commonly require safe vehicle operation in dynamic, high‑risk, or remote environments.

Industry sectors where this unit may be relevant to:

Emergency services
Public safety and security
Fire and rescue
Mining and resources
Local government operations
Utilities and infrastructure
Transport and logistics
Industrial and high‑risk work environments

While this unit provides skills relevant to the roles listed above, completion does not guarantee employment or specific job placement

What will I learn?

The PUAVEH001 Drive vehicles under operational conditions unit provides students with the full cycle of safely preparing, operating, and monitoring an operational vehicle. They cover selecting the right vehicle for the terrain, completing readiness checks, driving with low‑risk techniques, manoeuvring in line with regulations, and continuously assessing traffic and environmental conditions to protect people, property, and equipment.

On completing PUAVEH001 – Drive vehicles under operational conditions, students will be able to:

Prepare vehicle for operational response
Drive the vehicle
Monitor traffic, road and terrain under operational conditions

Accredited Units

This course includes the following nationally recognised unit(s) of competency:

PUAVEH001 Drive vehicles under operational conditions

National Training Register – PUAVEH001 Drive vehicles under operational conditions is a stand-alone unit of competency, accredited under the Australian Qualifications Framework (AQF).

Qualifications that include this unit are:

PUA30420 Certificate III in Public Safety (SES Rescue) – National Training Register – PUA30420 Certificate III in Public Safety (SES Rescue)
PUA30519 Certificate III in Public Safety (SES Operations) – National Training Register – PUA30519 Certificate III in Public Safety (SES Operations)
PUA30622 Certificate III in Public Safety (Firefighting and Emergency Operations) – National Training Register – PUA30622 Certificate III in Public Safety (Firefighting and Emergency Operations)
PUA40219 Certificate IV in Public Safety (SES Leadership) – National Training Register – PUA40219 Certificate IV in Public Safety (SES Leadership)
PUA41019 Certificate IV in Public Safety (Leadership) – National Training Register – PUA41019 Certificate IV in Public Safety (Leadership)

Unit Code	Unit Name
PUAVEH001	Drive vehicles under operational conditions

Language, Literacy & Numeracy (LLN)

Participants will need sufficient English skills to interpret safety instructions, complete documentation and communicate during classroom and practical demonstrations and assessments.
A pre-course LLND assessment ensures you have the reading, writing, numeracy and communication skills needed to successfully complete the course.
Digital Literacy – you will require digital technology proficiency sufficient to use and navigate various forms of digital and electronic tools, platforms and technology to communicate and demonstrate understanding of course information and skills.

Pre-Requisites

There are no prerequisites for this unit

Assessment

The following methods will be used to assess competency for PUAVEH001 Drive vehicles under operational conditions:

Assessor Checklists
Theoretical Assessments including short answer and multi-choice questions
Individual and team based practical and scenario assessments

Certification

The PUAVEH001 Drive vehicles under operational conditions unit is a nationally recognised competency, accredited under the Australian Qualifications Framework (AQF).

Successful participants will receive a Statement of Attainment for National Training Register – PUAVEH001 Drive vehicles under operational conditions issued by an Australian Registered Training Organisation (RTO) upon demonstrating competency in all assessment requirements.

Training and Assessment delivered under the auspices and in partnership arrangement on behalf of Health Security & Education Pty Ltd, RTO 4090

What will be provided on the day

Personal Protective Equipment (PPE) and training materials will be provided on the day of your course.

Our Forrestdale Training Facility has a compact kitchen area with an automated tea/coffee machine.

A fridge and microwave are provided for participants to store and heat their own snacks/meals.
A vending machine is stocked with quick snacks, healthy options and bottled/canned drinks.
Alternatively, there are a variety of food outlets and cafes close by. We recommend purchasing before your course starts as businesses may change advertised operating hours without notice.

Please bring your own water bottle – we have a cold-water unit for refills.

What to wear

Courses include practical demonstrations and assessments that all participants are required to be involved in.

All participants are required to wear:

Long pants
Long sleeved shirts
Steel cap safety boots or fully enclosed shoes/boots/sneakers. Slip on shoes are not suitable for driving demonstrations or assessments.
Prescription glasses if worn

We also encourage you to dress accordingly for weather conditions and suggest the following items:

Hat
Sunglasses
Additional clothing to keep dry/warm if raining or windy

Driving - Fitness to Undertake Training & Assessment

To ensure the safety of all participants and maintain the integrity of our assessment processes, all students must be fit to participate in practical training and assessment activities. These requirements reflect industry safety expectations, including those used in mining and high‑risk environments.

Our fitness‑for‑assessment procedure includes:

Self‑Declaration: By enrolling and attending, you confirm you are not under the influence of alcohol or illicit drugs.
Medication Disclosure: If you are taking medication that may cause drowsiness or impair your physical or cognitive abilities, you must advise your assessor so that reasonable adjustments or rescheduling can be considered.
Impairment Screening: Trainers may conduct impairment checks, including breathalyser (BAC) and drug screening, to ensure a safe training environment.
Removal for Safety: If a participant is assessed as unfit to safely participate, they will be removed from the session and rescheduled in accordance with our refund and rebooking policy.
Refund Conditions: Attending under the influence of drugs or alcohol is a breach of safety protocols. In such cases, no refund will be issued, and full course fees will apply for rebooking.

Identification and Licence verification for Driving courses

On the day of your course, you will be required to provide official photo identification on arrival at our Forrestdale Training Centre or other training locations.
• Official photo identification includes Driver Licence, Passport or Australian State or Territory issued Photo Card.

Expired identification will not be accepted.

DRIVING COURSES:

Driver Licence – A current & not restricted Australian Open or Provisional licence is required to be provided for this course. Your licence must be for at least a Car – C class vehicle.
Digital Licences – can be produced however it must be through the issuing state app and be online (screenshots or offline versions will not be accepted).
Learners Permit – are not valid for driving courses
International licences – are not valid for driving courses

Failure to produce your licence will mean you will not be able to complete the course, and you will not be refunded your course fees.

All licences are verified by RMTS through online checks on the day of the course.

Physical Capacity and Fitness

To safely participate in the PUAVEH001 Drive Vehicles Under Operational Conditions unit, students require a level of physical capacity that enables them to operate vehicles safely during public‑safety, emergency‑response, or operational driving scenarios. These requirements help ensure learners can meet safety obligations and perform the practical tasks expected during training and assessment.

Students should be able to:

Sit, operate, and control a vehicle for extended periods, including during emergency response driving, low‑risk driving techniques, and operation across varied terrain such as sealed roads, unsealed surfaces, and off‑road environments.
Enter and exit the vehicle safely, which may involve climbing into higher‑set cabins, using steps or handholds, and managing doors, seat restraints, and operational equipment.
Perform pre‑operational checks and cabin drills, including inspecting tyres, checking fluids, confirming equipment readiness, and completing start‑up procedures in accordance with organisational requirements.
Maintain situational awareness and respond to changing conditions, such as traffic flow, road hazards, weather, and operational demands, while sustaining concentration and coordination.
Carry out basic manual handling tasks, including loading or unloading equipment, handling vehicle accessories, or managing items up to approximately 10–15 kg.
Operate safely under pressure, including responding to hazards, performing controlled braking, manoeuvring in confined or unpredictable environments, and making rapid decisions when required.
Work in outdoor and operational conditions, which may include exposure to heat, dust, noise, vibration, and weather typical of emergency services, public safety, or field‑based environments.
Have adequate vision and hearing (with or without aids) to identify hazards, monitor traffic and terrain, communicate effectively, and follow safety instructions.

If a student has concerns about meeting these requirements, we encourage them to contact us before enrolling so we can discuss reasonable adjustments or alternative pathways where appropriate.

Photography and Filming

We will capture training, demonstrations and assessment by taking photographs or video or sound recordings.
We will include in our enrollment package to you a photographic/media consent form which details the collection and use of your personal image in any way by Risk Management Training Solutions Pty Ltd (RMTS) for print and digital communications, publications, productions or presentations as well as for identification purposes and as evidence of participation and assessment activity.
Your completed consent form will be placed on file and retained by RMTS. We will also advise you in this form on how you can withdraw your consent.

Duration

Delivered over 1 day.

Exact daily schedules—including start and finish times, break periods, and assessment windows—will be provided upon completion of enrolment, allowing us to tailor information to your specific training group and location.

RMTS trainers and assessors deliver a blend of supervised learning, theoretical assessment activities, and realistic scenario‑based training to ensure learners can confidently apply their skills in real‑world environments. Each training day is structured to balance knowledge development with hands‑on practice, including multiple opportunities to participate in realistic simulations and skill‑building exercises.

Delivery Locations

This course is delivered to provide realistic, industry-specific learning environments. See our locations below:

Forrestdale office
On site
In your workplace/office

ON-SITE with RMTS

RMTS can deliver many of our courses at your nominated site or in your workplace.

Why send staff off‑site when RMTS can deliver high‑impact training right at your location?

Forrestdale, Perth

Experience dynamic learning at Forrestdale, Perth with great facilities in a great location

Fees

The cost of the PUAVEH001 Drive vehicles under operational conditions unit reflects the high level of industry expertise, resources, and workplace-based training provided.

Title	Fee
Full Fee¹	$470
Location	Please request course fees for your workplace or onsite delivery

RMTS Fee Policy - Full fees are payable upfront to secure your enrolment
Corporate Bookings - We are able to provide an invoice upon receipt of your purchase order
Location - Fees displayed are applicable to training conducted at our Forrestdale Training Facility only

What's next?

Enrolling in our courses is now easier than ever, thanks to our online enrolment process. Simply click on the button below, and you’ll be taken to our online enrolment form, where you can provide all the necessary information and complete your enrolment in just a few easy steps. Our online enrolment process is convenient, secure, and available 24/7, ensuring that you can enrol at a time that suits you. Don’t let distance or time constraints hold you back from achieving your career goals. Enrol online today and take the next step in your professional journey.

Available Intakes

ENQUIRE NOW

For information regarding enrolment, please submit an enquiry

Name	Date	Time	Location	Spaces	Cost
Drive vehicles under operational conditions	29 October 2026	08:30 am – 04:30 pm	Forrestdale Training Centre	6	$500.00	Enrol

Have some questions?

If you have any questions related to the PUAVEH001 – Drive vehicles under operational conditions please contact us here

Related Courses

Operational Safety, Emergency Response, 4WD Courses

$500

AHCMOM217 - Operate quad bikes

The AHCMOM217 – Operate quad bikes unit builds the essential skills to safely operate quad bikes across a range of terrains and workplace conditions. This practical course prepares you to complete pre-start checks, manage hazards, use safety features correctly, and operate with confidence under supervision.

Emergency Response, 4WD Courses

$680

Operational 4WD Response and Vehicle Recovery

Operational 4WD Response and Vehicle Recovery – an intensive program combining two nationally accredited units: FWPCOT3326 – Recover four wheel drive vehicle and PUAVEH001 – Drive vehicles under operational conditions, into one safety-focused day of training. Purpose-built for high-pressure environments, this course bridges the gap between complex off-road navigation and advanced asset recovery in challenging operational conditions.

Emergency Response, Fire Safety, Mining Operations, Construction, Verification of Competency (VOC), Civil Construction

$795

RIIMPO326E - Conduct water vehicle operations

RIIMPO326E – Conduct water vehicle operations unit equips learners with the skills and knowledge required to safely load, haul, and distribute water using a water vehicle across civil infrastructure, mining, and extractive industry environments. The course introduces participants to the operational principles, compliance obligations, and workplace procedures that underpin safe water cart operations.

Operational Safety, Emergency Response, 4WD Courses

$420

AHCMOM216 - Operate side by side utility vehicles

The AHCMOM216 – Operate side by side utility vehicles unit builds the essential skills to safely operate side‑by‑side utility vehicles (SSVs) across a range of terrains and workplace conditions. This practical course prepares you to complete pre‑start checks, manage loads, use safety features correctly, and operate with confidence under supervision.

Operational Safety, Emergency Response, 4WD Courses

$380

RIIVEH305F - Operate and maintain a four wheel drive vehicle

The RIIVEH305F – Operate and maintain a four wheel drive vehicle builds the skills and knowledge required to safely operate and maintain a four‑wheel drive vehicle in the mining, resources and infrastructure sectors. Learners develop practical capability in pre‑departure checks, off‑road driving techniques, environmental responsibility, and safe vehicle recovery while working with minimal supervision in varied and sometimes challenging conditions.

Operational Safety, Emergency Response, Fire Safety, High-Risk Work Environments, Mining - Surface, Mining - Underground, Industrial

$695

PUAFIR324 - Render hazardous materials incidents safe

The PUAFIR324 – Render hazardous materials incidents safe unit is designed to provide participants with the essential skills and knowledge required to respond effectively to emergency incidents involving hazardous materials in a workplace. It is relevant for individuals working in high-risk environments such as mining, heavy industry and construction. The unit focuses on ensuring public and environmental safety during incidents involving dangerous substances, spills or chemical emergencies

Operational Safety, Emergency Response, Fire Safety, High-Risk Work Environments, Industrial

$240

PUAEQU001 - Prepare, maintain and test response equipment

The PUAEQU001 – Prepare, maintain and test response equipment course equips participants with the essential skills and knowledge required to inspect, maintain and test a range of equipment. It includes inspecting emergency response equipment and cleaning, maintaining and repacking ready for use It is relevant for individuals with a primary role in equipment maintenance or the testing and maintaining equipment in an operational role.

Emergency Response, Fire Safety, High-Risk Work Environments, Industrial

$695

PUAFIR306 - Identify, detect and monitor hazardous materials at an incident

The PUAFIR306 – Identify, detect and monitor hazardous materials at an incident course involves acquiring the skills and knowledge to use specific equipment to detect a variety of contaminants that may be found at an incident involving hazardous materials. The training includes assessment of risk of involved contaminants and formulating plans for safe isolation and mitigation. It is relevant for individuals working in high-risk environments such as mining, heavy industry and construction.

Emergency Response, Fire Safety, High-Risk Work Environments

$390

RIIERR201E - Conduct Fire Team Operations

The RIIERR201E – Conduct fire team operations course is designed to provide participants with the essential skills and knowledge required to conduct fire team operations, including fighting and containing fires. This unit applies to those working in site-based roles in the mining, metalliferous mining, drilling, extractive, and civil infrastructure environments.